The A215 Double-Side Cope Shaper is equipped with mirrored shaping stations on either side. The first station has the option to be configured to jump in or out during the cut and includes automatic CNC control of the horizontal axis for the best possible repeatability. Servo positioning is accurate within.002”. The second unit rotates against the direction of feed to finish the cut started by the first shaper. This Double-End Cope Tenoner has variable-speed transporter drive motors that are electronically synchronized.
The A215 Double-Side Cope Shaper profiles BOTH edges of MDF and hardwood parts in ONE continuous pass. With the movable side adjustable for width, the transporter assemblies incorporate an infeed support area that has a gravity-fed hopper system. Bottom-feed chains with pop-up lugs on 4” centers to grab and pull the substrate from the bottom of the hopper into the frame cabinet and past the shaping stations. Two optional automatic space ball insertion assemblies can be attached to the hopper feed system to automatically insert balls into the board. The A215 Double-Side Cope Shaper has inserting nozzles that are positioned directly above the feed chain to insert space balls into the rail groove approximately 5/8” away from the cope cut.
After the substrate passes through the machine, it automatically drops onto two urethane belts driven by an AC motor that is synchronized with the transport chain, returning the finished parts to the operator. The belts are driven by a common shaft and are running in the opposite direction of the transport system.
The A2515 Double-Side Cope Shaper is equipped with mirrored shaping stations on either side that automatically position all necessary adjustments for each profile setup. This cope shaper is equipped with variable-speed transporter drive motors that are electronically synchronized and includes automatic CNC control of the hold-down and the horizontal and vertical axes for all shaping stations for the best possible repeatability.
The A16 Cope Shaper with single side dual spindle is designed to shape single or multiple parts in one pass. The cope shaper has an average cycle time of 4 seconds making it a highly productive machine. Designed to run either S4S or profiled parts without the need for a backer block for eliminating tear-out.
The A26 Cope Shaper is designed to shape single or multiple parts in one pass. Each shaping station is equipped with a precision-balanced drive motor and spindle. The counter-rotating spindles cut against the direction of feed. Spindles can be configured with quick change, HSK, or stacked tooling.