The A16 Cope Shaper with single side dual spindle is designed to shape single or multiple parts in one pass. The cope shaper has an average cycle time of 4 seconds making it a highly productive machine. Designed to run either S4S or profiled parts without the need for a backer block for eliminating tear-out.
The pneumatic hold-down clamp with a non-marring urethane pad secures the workpiece as close to the cutting head as possible. Directional clamping ensures consistently square cuts. The A16 Cope Shaper allows for processing parts of random length at one time and is not limited by the length of the part.
Each shaping station on the A16 Cope Shaper is equipped with a precision-balanced drive motor and spindle or a variable-speed spindle that is fan-cooled and accepts HSK-63F tool holders. The counter-rotating spindles eliminate tear-out on two parts at a time. The shaper assembly traverses back and forth while the substrate is clamped and stationary.
A gear motor with rack and pinion transports the shaper through its cycle, driving the shaper linearly in two directions to make a successful cope cut. The travel of the shapers is constant regardless of whether one or two parts are being machined at once.
The A16 Cope Shaper has a precision flat surface plate that is provided for the substrate to rest upon. Pneumatic top clamps secure the parts to the surface plate and a side clamp secures the parts laterally to an edge stop. A factory set depth stop will limit how far the substrate can be pushed into the machine to control how much of the length is removed from the substrate during the cycle.
The A15 Stile and Rail Shaper straight cuts inside edges on the stiles, rails, and the outside edges (long-grain). This is the only machine on the market with the capability of shaping small parts. Spindles can be configured with quick change, HSK, or stacked tooling.
The A26 Cope Shaper is designed to shape single or multiple parts in one pass. Each shaping station is equipped with a precision-balanced drive motor and spindle. The counter-rotating spindles cut against the direction of feed. Spindles can be configured with quick change, HSK, or stacked tooling.
The A115 Shaper Sander can accommodate four shaping/sanding stations. Clockwise and counter-clockwise rotations are used on specific shapers to eliminate rejects and produce the highest quality finished part. The A115 Shaper Sander can be configured with one to two shaping units to shape outside edges and raised panels. When equipped with two, the first shaper is reversible and rotates with the feed direction, and as the substrate passes, the station jumps in to make a short but full depth cut on its trailing edge to prevent wood grain tear-out.