L117 Edge Foiler
The L117 Edge Foiler shapes the profile, sands it smooth and applies the dry-transfer finish foil on MDF in a single continuous process. Stock is transported through the machine by a bottom-feed chain with special pads that grip the stock securely while it passes through the stations. The L117 Edge Foiler has digital readouts and micro-point tilt at the stations and digital readout on the ever-square infeed guide. This machine is designed for easy setup and repeatable tool change between profiles.
Shaping station is equipped with a precision-balanced spindle drive motor and spindle. The spindle rotates against the direction of feed. The dual sanding stations are equipped with precision-balanced spindle drive motors and spindles. The infeed spindle rotates with the direction of feed and the outfeed spindle rotates against the direction of feed.
The L117 Edge Foiler has optional top and bottom score saw with high-speed arbors and climb cut rotation to cleanly cut through papers, veneers, etc. Scoring eliminates any chip out and enables the cutter to shape a clean edge which is vital to the finishing process.
The L117 Edge Foiler has an optional outfeed extension module with an adjustable grooving saw that provides edge foiling and drawer bottom groove in one pass. The saw is adjustable for width and depth of the cut and contains a dust hood and vacuum outlet.
Each foiling station is equipped with an 8” diameter foil wheel, a non-contact sensor, and an oven with automatic temperature control. The L117 Edge Foiler foiling stations are equipped with a pneumatic jump to automatically disengage foil wheel when the substrate is not present. The foil unwind has a large capacity, accuracy in tracking, and the ability to adjust the tension constantly.
- Accommodates a minimum part size of 3″x3″ + face profile
- Accommodates a part.1.25″–2″ thick
- Accommodates up to seven stations
- Shaping station, dual sanding station and dual foiling station (up to four)
- Score saws and post cleaner stations (option)
- Groove saw station (option)
Step 1: REQUEST PASSWORD
Step 2: CHOOSE FILE
You may also like…
Double-End Foiler: Profiles, sands, and applies dry transfer finishing foil to both edges of your MDF parts in one pass.
Profiles, sands, applies transfer finishing foil to two edges in one pass • Automatically sizes and squares material during normal process • Precision digital readouts for fast changeovers • Precision chains and programmable pop-up dogs
L217 DOUBLE-END FOILER
The L217 Double-End Foiler profiles, sands, and applies dry-transfer finishing foil to both edges of MDF parts in one continuous pass. Designed for quick and easy changeover. Foiling stations equipped with 8˝ diameter foil wheels, non-contact sensors, and ovens for automatic temperature control.
- Accommodates up to seven stations per side
- Top and bottom score saws, groove station, shaping station, dual sanding station and dual foiling station (up to four)
- Post clean stations (option)
- L215 model available (up to 4 stations)
L115 EDGE FOILER
The L115 Edge Foiler shape the profile, sand it smooth and apply the dry-transfer finish foil on MDF consecutively in one continuous process. Stock is transported through the machine by a bottom-feed chain with special pads that grip the stock securely while it passes the stations. The L115 Edge Foiler has digital readouts and micro-point tilt at the stations and digital readout on the ever-square infeed guide, this machine is designed for easy setup and repeatable tool change between profiles.
- Accommodates up to four stations