A215 DOUBLE-SIDE COPE SHAPER

SKU: A215 Cope
Features

A215 Double-Side Cope Shaper

The A215 Double-Side Cope Shaper is equipped with mirrored shaping stations on either side. The first station has the option to be configured to jump in or out during the cut and includes automatic CNC control of the horizontal axis for the best possible repeatability. Servo positioning is accurate within.002”. The second unit rotates against the direction of feed to finish the cut started by the first shaper. This Double-End Cope Tenoner has variable-speed transporter drive motors that are electronically synchronized.

The A215 Double-Side Cope Shaper profiles BOTH edges of MDF and hardwood parts in ONE continuous pass. With the movable side adjustable for width, the transporter assemblies incorporate an infeed support area that has a gravity-fed hopper system. Bottom-feed chains with pop-up lugs on 4” centers to grab and pull the substrate from the bottom of the hopper into the frame cabinet and past the shaping stations. Two optional automatic space ball insertion assemblies can be attached to the hopper feed system to automatically insert balls into the board. The A215 Double-Side Cope Shaper has inserting nozzles that are positioned directly above the feed chain to insert space balls into the rail groove approximately 5/8” away from the cope cut.

After the substrate passes through the machine, it automatically drops onto two urethane belts driven by an AC motor that is synchronized with the transport chain, returning the finished parts to the operator. The belts are driven by a common shaft and are running in the opposite direction of the transport system.

  • Compact Design
  • Fast Changeover (no backer blocks required)
  • Hopper feeder
  • Fastest throughput in the industry, one part per second
  • Labor savings with automatically inserts space balls (option)
  • Consistently accurate servo jump station addresses blowout
  • Capable of producing a minimum part length of 4”
  • Return belt system (option)
Product Information

You may also like…

  • A215 Double-End Tenoner

    A215 DOUBLE-END TENONER

    The A215 Double-End Tenoner profiles and sands both edges of hardwood parts in one continuous pass. Each side of the machine is comprised of two shaping units that make the same cut to prevent end grain tear-out. The first shaper rotates with the feed direction, and as the substrate passes, the station jumps in to make a short but full depth cut on the substrate’s trailing edge. The second unit rotates against the direction of feed to finish the cut started by the first shaper. Jump shapers are equipped with a mechanical switch and PLC to time the jump which automatically adjusts for part size and feed speed of the machine.

    • Accommodates up to 4 shaping and sanding stations
  • A200 SERIES

    Manual adjustment series designed for fast and repeatable set up

    A217 Double-End Tenoner

    A217 DOUBLE-END TENONER

    The A217 Double-End Tenoner profiles and sands both edges of hardwood parts in one continuous pass. Depending on model configuration, each side of the machine is comprised of up to three shaping units that make the same cut to prevent end grain tear-out. The first shaper rotates with the feed direction, and as the substrate passes, the station jumps in to make a short but full depth cut on the substrate’s trailing edge.

    • Accommodates 6 or more shaping and sanding stations
    • Configured with automatic pop-up dogs that push parts into the machine up to any length
    • Spindles can be configured with Quick Change, HSK, or stacked tooling