The CR Series—CR1500/CR1800 Slitter Rewinder is designed to provide optimum product quality and service. The front unwind assembly, integrally mounted on the operator’s side of the mainframe or rear unwind assembly, includes full lateral travel of headstock and tailstock to accommodate various roll widths and positions within the web area. The CR1500/CR1800 Slitter Rewinder incorporates an operator adjusted pneumatic brake for consistent web tension. The CR1500/CR1800 Slitter Rewinder can be equipped with a splicing table consisting of web clamps and a table tilted up to 30° for cutting and taping. An adjustable bow roll is installed before the knife section to eliminate all wrinkles in the substrate before slitting. The CR1500/CR1800 Slitter Rewinder can be equipped with rotary shear-, score-, razor-slitting stations or a combination are fully adjustable, mounted on an easy to read calibration bar. The web is rewound on fiber cores using two cantilevered 3” differential shafts with spacer rings or air expanding leaf shafts. CR1500/CR1800 Slitter Rewinder unloading arms can be manually positioned concentric with the rewind shafts for unloading of the finished rewound rolls.
The CX Series Slitter Rewinder is designed to provide optimum product quality and service.
The CA1000 Slitter Rewinder is designed and manufactured primarily for high-speed slitting and winding of coated papers and films for narrow web slitting.
The C Series Slitter Rewinder is designed and manufactured primarily for high-speed winding of vellums, papers, and polyester films.