CX Series Slitter Rewinder
The CX Series—CX1500/CX1800 Slitter Rewinder is designed to provide optimum product quality and service. The rear-mounted hydraulic unwind assembly includes full lateral travel of headstock and tailstock to accommodate various roll widths and positions within the web area. The manually controlled, hydraulically actuated tailstock engages the 3” unwind chucks to the master roll. The CX1500/CX1800 Slitter Rewinder will be equipped with a splicing table consisting of web clamps and a table tilted to 30◦ for cutting and taping. An adjustable bow roll is installed before the knife section to eliminate all wrinkles in the substrate before slitting. The CX Series Slitter Rewinder can be equipped with rotary shear-, score-, razor-slitting stations, or their combinations. The web is rewound on fiber cores using two 3” differential shafts with core locking segments. The rewind is equipped with a variable-speed rewind drive programmed to run 20-50 rpm faster than the web speed allowing slipping of the core to maintain equal tension across all rewind rolls. The CX1500/CX1800 Slitter Rewinder unloading arms can be positioned concentric with the rewind shafts for unloading of the finished rewound rolls.
- Accommodates materials of 0.001-0.030 mils thick
- Accommodates a maximum unwind roll diameter of 60″
- 3″ diameter differential rewind shafts w/core locking segments
- Accommodates a maximum rewind diameter of 30″
- Hydraulic lift loader unwind
- Shaftless rear unwind
- Electronic edge guide w/servo unwind positioning
- Splicing table with web clamps at catwalk 0° to 30°
- Digital readout for anvil positioning
- Automatic web tension
- Rotary shear-, score-, razor-slitting or their combinations
- Servo knife positioning
- Automatic laser core positioning
- Automatic core pusher and unload fork assembly (optional)
- Lay-on (full or individual), cleaning, bow, and static rollers
- Selvage educator, anti-static bar (option)
- Oscillating trim winder (option)
- Flange-mounted air expanding rewind shafts (option)
- 3” and 6” diameter lift-out differential rewind shafts (option)
Step 1: REQUEST PASSWORD
Step 2: CHOOSE FILE
You may also like…
-
CR SERIES
CR1500/CR1800 SLITTER REWINDER
The CR Series Slitter Rewinder’s front unwind assembly, integrally mounted on the operator’s side of the mainframe or rear unwind assembly, includes full lateral travel of headstock and tailstock to accommodate various roll widths and positions within the web area.
- Shaftless front or rear unwind
- Web tension-pneumatic unwind brakes
- Razor, Rotary Shear, Score, or a combination is available
- Duplex rewind with leaf or standard differential w/spacer rings available
- Cleaning, bow, and static rollers
- Manual unloader, static control, selvage educator (options)
-
CA Series Duplex Slitter Rewinder: Cantilever design for slitting different substrates up to 27″ wide.
CA SERIES
CA1000 SLITTER REWINDER
The CA1000 Slitter Rewinder is designed and manufactured primarily for high-speed slitting and winding of coated papers and films for narrow web slitting.
- Air expanding unwind shaft, 3” ID, leaf type
- Servo-controlled edge guide sensor
- Rotary shear, score, razor or combination is available
- Duplex 3” leaf rewind shafts
- Selvage educator, auto tension, bow roller, anti-static bar, differential rewind shafts (option)
-
C/CX/CR Series Slitter Rewinder: Duplex slitter rewinder series designed and manufactured primarily for high-speed winding of vellum, papers, and polyester films.
C SERIES
C1500/C1800 SLITTER REWINDER
The C Series Slitter Rewinder is designed and manufactured primarily for high-speed winding of vellums, papers, and polyester films.
- Hydraulic lift loader unwind
- Shaftless rear unwind
- Digital readout for anvil positioning
- Automatic web tension
- Rotary shear, score, razor or combination
- Automatic core positioning (Optional)
- 3″ and 6″ diameter lift-out differential shafts
- Automatic core offloading and unload fork (Optional)
- Lay-on, cleaning, bow and static rollers
