C1500/C1800 SLITTER REWINDER

SKU: C1500
Description

C Series Slitter Rewinder

The C Series—C1500/C1800 Slitter Rewinder is designed and manufactured primarily for high-speed winding of vellums, papers, and polyester films. Depending on machine configuration, the C1500/C1800 Slitter Rewinder can be equipped with rotary shear-, score-, or razor-slitting stations. These assemblies are driven by a servo motor for precise positioning. The servo system follows preset recipe dimensions to locate each slitting knife one at a time until all knives are positioned. The web is rewound on fiber cores using two 3” core locking differential shafts with locking segments. The rewind is equipped with a variable-speed rewind drive programmed to run 20-50 rpm faster than the web speed allowing slipping of the core to maintain equal tension across all rewind rolls. The rear-mounted unwind assembly includes full lateral travel of headstock and tailstock to accommodate various roll widths and positions within the web area. The C1500/C1800 Slitter Rewinder will be equipped with a splicing table consisting of web clamps and a table tilted to 30° for cutting and taping. Unloading arms can be positioned concentric with the rewind shafts for unloading of the finished rewound rolls.

  • Accommodates a maximum unwind roll width (60″ C1500) (72″ C1800)
  • Accommodates materials 0.005-0.050 mils thick
  • Hydraulic lift loader unwind
  • Shaftless rear unwind
  • Accommodates a maximum unwind roll diameter of 60″
  • Electronic edge guide w/servo unwind positioning
  • Splicing table with web clamps at catwalk 0° to 30°
  • Digital readout for anvil positioning
  • Automatic web tension
  • Rotary shear-, score-, razor-slitting or their combinations
  • Servo knife positioning
  • Automatic laser core positioning (Optional)
  • 3″ and 6″ diameter lift-out differential shafts
  • Accommodates a maximum rewind diameter of 40″
  • Automatic core pusher and unload fork assembly (optional)
  • Lay-on (full or individual), cleaning, bow, and static rollers
  • Selvage educator, anti-static bar (option)
  • Flange-mounted air expanding rewind shafts(option)
Product Information

Step 1:     REQUEST PASSWORD

Step 2:     CHOOSE FILE

C1500 Specs

C1500 Brochure

C1500 Video

You may also like…

  • CX SERIES

    Voorwood CX1800 Slitter Rewinder

    CX1500/CX1800 SLITTER REWINDER

    The CX Series Slitter Rewinder is designed to provide optimum product quality and service.

    • Accommodates all other features of the C1500/1800
    • 3″ diameter differential rewind shafts w/core locking segments
    • 3” and 6” diameter lift-out differential rewind shafts (option)
  • CA Series Duplex Slitter Rewinder: Cantilever design for slitting different substrates up to 27″ wide.

    CA SERIES

    Slitter Rewinder For Woodworking

    CA1000 SLITTER REWINDER

    The CA1000 Slitter Rewinder is designed and manufactured primarily for high-speed slitting and winding of coated papers and films for narrow web slitting.

    • Air expanding unwind shaft, 3” ID, leaf type
    • Servo-controlled edge guide sensor
    • Rotary shear, score, razor or combination is available
    • Duplex 3” leaf rewind shafts
    • Selvage educator, auto tension, bow roller, anti-static bar, differential rewind shafts (option)
  • CR SERIES

    Voorwood Slitter Rewinder - CR1500

    CR1500/CR1800 SLITTER REWINDER

    The CR Series Slitter Rewinder’s front unwind assembly, integrally mounted on the operator’s side of the mainframe or rear unwind assembly, includes full lateral travel of headstock and tailstock to accommodate various roll widths and positions within the web area.

    • Shaftless front or rear unwind
    • Web tension-pneumatic unwind brakes
    • Razor, Rotary Shear, Score, or a combination is available
    • Duplex rewind with leaf or standard differential w/spacer rings available
    • Cleaning, bow, and static rollers
    • Manual unloader, static control, selvage educator (options)