CS610 CONVERTER SHEETER

SKU: CS610
Description

CS610 Converter Sheeter

The CS610 Converter Sheeter unwinds substrate from a finished roll, slits the roll into the desired widths, and then cuts the material into the desired length. It is configured with an unwind station, slitting module, and cutoff/sheeting section working as a continuous process.

The unwind station is configured with a single 3-inch cantilevered, air expanding, unwind shaft. Rotation speed and tension are regulated with a disc brake, PLC, and a load cell to maintain constant web tension. A safety laser intrusion sensor is located below the unwind, near the floor.

The CS610 Converter Sheeter slitting station consists of a rotary knife/anvil module with twelve score-knife assemblies mounted on a dovetail bar for manual adjustment of the cut width. The substrate is pulled off the unwind and through the slitting module using two urethane covered power rollers compressing the material between the two rolls.

The cutoff/sheeter station has a nip drive that pulls substrate through a linear shear knife bar set to the desired length. The knife is electronically/cam actuated to cut the material. The cut substrate is fed onto a catch table, adjustable from 0”-24” in width. This catch table will trap the material on both sides to aid in the stacking of a narrow width substrate.

The CS610 Converter Sheeter is equipped with a power panel lighted touchscreen/CPU with four basic screens required for the setup and operation of the machine.

THE CS610 CONVERTER SHEETER CAN BE CONFIGURED TO MEET YOUR REQUIREMENTS

  • Accommodates a maximum material 0.020″ thick
  • Accommodates a maximum unwind roll width of 24”
  • Accommodates a maximum unwind diameter up to 24″
  • Air expanding 3” unwind shaft
  • Slitting station with rotary shear-, score-, or razor-slitting
  • Sheeting station with a linear shear knife
  • Adjustable catch table
  • Laser scanner intrusion sensor
Product Information

Step 1:     REQUEST PASSWORD

Step 2:     CHOOSE FILE

CS610 Specs

CS610 Brochure

CS610 Video

You may also like…

  • CC4312 Series Core Cutter: Used to cut cores up to 36″ in length.

    Voorwood Core Cutter - CC4312

    CC4312 CORE CUTTER

    The CC4312 Core Cutter provides an efficient method for cutting of cardboard cores of various ID’s from 3” to 12”, precisely every time.

    • Ball bearing mandrel
    • Fully adjustable 0-36″ stop bar w/scale (18” standard)
    • High speed steel cutting blade
    • Durable aluminum cutter anvil-prolongs blade life
    • Quick locking chuck-makes loading simple
  • Voorwood Converter Sheeter - CPF610

    CPF610 CONVERTER SHEETER

    The CPF610 Converter Sheeter is a perforating/folding machine that unwinds substrate from a finished roll, perforates, and folds the edges of the substrate along the perforation line.

    • Air expanding 3″ unwind shaft
    • Perforating station
    • Folding station
    • Nip station
    • Air expanding 3″ rewind shaft
  • Voorwood Converter Sheeter - CRD610

    CRD610 CONVERTER SHEETER

    The CRD610 Converter Sheeter unwinds fibrous sheet with .125-.270 inch high ribs glued at even spacing along the width of the substrate.

    • Air expanding 3″ unwind shaft
    • Counting/drive station (counts number of ribs)
    • Sheeting station with a linear shear knife
    • Detachable catch bin